+61466797900 [email protected]

Drizoro Maxseal Flex Express – 30 minutes to 1 hour between Coats

Drizoro Maxseal Flex Express – 30 minutes to 1 hour between Coats

ADVANTAGES of Drizoro Maxseal Flex Express – 30 minutes to 1 hour between Coats

  1.  This means you can get you waterproofing done in the same day.
  2.  NO MORE TRIPS BACK TO SITE – SAVES LABOUR AND TRAVEL COSTS
  3.  Curing is sufficient after 2 hours drying-time to be able lay ceramic tiles or with cement mortars, screeds, etc.
  4.  Provides a flexible waterproofing coat with crack-bridging capability.
  5.  Permeable to water vapour, allows the substrate to breath.
  6.  Wet substrates before application.
  7.  Excellent adhesion on concrete, brick, tiles, stone, cement mortar, prefabricated block, etc.
  8.  No primer or bonding agent is required.
  9.  Easy manual application: brush or broom.
  10.  Environmental friendly, solvent-free and suitable for working areas with bad ventilation
  11. Minimum waiting time between coats is 30-60 minutes means you can get your waterproofing done on the same day.
  12. NO MORE TRIPS BACK TO SITE – SAVES LABOUR AND TRAVEL COSTS
  13. Suitable to be covered after 2 hours drying-time with ceramic tiles or with cement mortars, screeds, etc.
  14. Provides a flexible waterproofing coat with crack-bridging capability.
  15. Permeable to water vapour, allows the substrate to breath.
  16. Suitable to be applied on wet substrates.
  17. Excellent adhesion on concrete, brick, tiles, stone, cement mortar, prefabricated block, etc.
  18. Resistant to abrasion and UV rays.
  19. No primer or bonding agent required.
  20. Easy manual application: brush or broom.
  21. Environmental friendly, solvent-free and suitable for working areas with bad ventilation
  22. Withstands and protect concrete against freeze/thaw cycles, atmospheric pollution, marine environment, corrosive effects of sea water, sewage water and de-icing salts.
  23. Allows water vapour diffusion, very good water vapour permeability.
  24. Withstands the root penetration, when properly reinforced with fibber glass mesh.

MAXSEAL® FLEX EXPRESS 

With its very fast setting-time makes it the ideal product for waterproofing with sudden rainfalls, short-time curing for flooding tests, splash zone areas or tiling with ceramic after 2 hours drying-time.